Intel S7000FC4UR Technical Product Specification

Intel® Server System S7000FC4UR TPS Main Board
Revision 1.0
5
 On-demand Mode: Software controllable method to reduce power consumption
 Platform Environment Control Interface (PECI)
 Streaming Single Instruction, Multiple Data (SIMD) Extensions 2 and 3 (SSE2, SSE3)
2.2.1.1 Processor Heatsink
The main board uses the Common Enabling Kit (CEK) heatsink solution. The CEK design
meets the 64-bit Intel
®
Xeon
®
Processors MP thermal performance targets. Each CEK heatsink
consists of the following components:
 Passive heatsink (with captive standoff and screws)
 Thermal Interface Material (TIM-2) – to cover the entire processor Integrated Heat
Spreader (I) and the heatsink base
 Hat spring/backplate – mounted on the backside of the main board
2.2.1.2 Processor Installation Order
The four-processor sockets are on independent front side buses. Therefore, there are no
installation order requirements enforced by the platform. The user is free to install supported
processors in any configuration desired.
However, one logical order is as follows:
1. Populate the lower number processor sockets.
2. Move to the higher numbers.
3. Populate sockets in the following order: socket 1, socket 2, socket 3, and socket 4).
The board does not support mixing different processor models.
2.2.2 Intel® 7300 Chipset Memory Controller Hub
The Intel
®
7300 Chipset Memory Controller Hub is the highest performance, most scalable
chipset offering in the 64-bit Intel
®
Xeon
®
Processor MP family. The chipset represents an
improvement to Intel’s four-way multi-processor platform.
2.2.2.1 Intel® 7300 Chipset Features
The Intel
®
7300 Chipset Memory Controller Hub is the center of the Intel
®
Server System
S7000FC4UR architecture. This chipset is designed for multi-core processors and includes the
advanced features detailed in the following bullets. For more detailed information, refer to the
Intel
®
7300 Chipset Datasheets referenced in the Appendix:
 Up to four 64-bit Intel
®
Xeon
®
Processors MP via independent 1067 MT/S FSBs
optimized for server applications.
 Maintains coherency across four independent FSBs.
 Double-pumped 40-bit address buses with a total address bandwidth of 133 million
addresses per second.

Intel S7000FC4UR Specifications

General

Brand	Intel
Model	S7000FC4UR
Category	Server
Language	English