Page | 178
This option alows the user to determine if, and when, they can be allowed to make changes locally
to a Run Order which has been loaded from a MOS NRCS.
There are three options available. Click on the pulldown to select. The default is Always.
Never: When selected the story editor will not lock automatically and changes can be made. Icons in
the Story Editor will be visible.
Always: When selected the story editor will lock automatically changes cannot be made. The use of
the lock button on the Story Editor will be disabled so it cannot be unlocked using this button. Icons
in the Story Editor will be greyed out.
When accepting updates: When selected, and Pause Newsroom Updates is OFF in the Run Orders
pane, the story editor should lock automatically. The use of the lock button on the story editor is
disabled so it cannot be unlocked that way. Icons in the Story Editor will be greyed out.
When selected, and Pause Newsroom Updates is ON in the Run Orders pane, the story editor should
unlock automatically. Icons in the Story Editor will be visible.
Please Note: If the user has locked the story editor using the lock button before one of the above
locking conditions occurs, when the condition is no longer true the story editor should remain locked,
just as the user left it.
Auto Story Numbering
Automatic Story Numbering on (active): if a rundown does not have story numbers WP-IP will assign
story numbers beginning with 500. If a story number is subsequently added by the Newsroom the
Automatic Story Numbering will be overwritten.
Automatic Story Numbering off (inactive): if a rundown does not have story numbers WP-IP will not
assign story numbers and no story numbers will be visible. If a story number is subsequently added
by the Newsroom the story number will be visible.
Save Run Order Selection
When active, rundowns which have been added to the Run Orders pane will be automatically saved
when WP-IP is closed. When WP-IP is reopened it will automatically launch these Run Orders and
begin loading them. The user will then select which Run Order they want to prompt.
Float/Cloak Stories With No Presenter Assigned
When enabled any story loaded that has a blank ID *(no presenter name)* will be cloaked. Leading
and trailing spaces will be discarded.
To Next Page
Loading...