IP autoscript WinPlus-IP - Advanced Display Configuration

Page | 217
Advanced Display Configuration
When an on-camera unit is connected to the WP-IP application via Ethernet, advanced configuration
and functionality can be set remotely via the WP-IP application. This includes configuring input
source, colour temperature, image orientation, image scaling and backlight power.
This feature means both prompter and talent monitor settings can be controlled without the need to
physically touch the device. In addition the displays can be programmed wherever the device can be
accessed on a network
Please Note: the Advanced display configuration requires WP-IP Software Version 1.6.6.216 or higher
& Firmware Version 1.5.1.191 or higher. To check device firmware select the device in the Devices
pane, right click & select Edit/Configuration. The Firmware Version can be seen in the General tab
For details on updating device Firmware please see Page 11 “Firmware Upgrade”
For details on updating WP-IP please contact your local Autoscript dealer or contact Videndum
Production Solutions directly.
The Autoscript models this feature can be applied to are:
Sales Part
Description
A9011-0001
19" EVO IP prompt monitor
A9011-0002
17" EVO IP prompt monitor
A9011-0003
15" EVO IP prompt monitor
A9011-0006
19" EPIC IP prompt monitor and 24" talent monitor system
A9011-0007
19" EPIC IP prompt monitor and 18.5" talent monitor system
A9011-0008
17" EPIC IP prompt monitor and 17.3" talent monitor system
A9011-0009
15" EPIC IP prompt monitor and 15.6" talent monitor system
A9011-0011
19" EVO IP prompt monitor (VITC/D-VITC option fitted)
A9011-0012
17" EVO IP prompt monitor (VITC/D-VITC option fitted)
A9011-0013
15" EVO IP prompt monitor (VITC/D-VITC option fitted)
A9011-0016
19" EPIC IP prompt monitor (VITC/D-VITC option fitted) and 24" talent monitor system
A9011-0017
19" EPIC IP prompt monitor (VITC/D-VITC option fitted) and 18.5" talent monitor system
A9011-0018
17" EPIC IP prompt monitor (VITC/D-VITC option fitted) and 17.3" talent monitor system
A9011-0019
15" EPIC IP prompt monitor (VITC/D-VITC option fitted) and 15.6" talent monitor system
A9011-1001
ETM-24: 24" EPIC talent monitor
A9011-1002
ETM-19: 19" EPIC talent monitor
A9011-1003
ETM-17: 17" EPIC talent monitor
A9011-1004
ETM-15: 15" EPIC talent monitor
Please Note: The list of applicable devices may be subject to change.