Page | 209
There are two options to load the 5PM Running Order.
Using the buttons in the toolbar choose either “Load and Reset Missing Configuration Items” or
“Load and leave missing Configuration items as currently set”
Load and Reset Missing Configuration Items
When applied any unsaved settings will be lost and items which are in the currently active
Configuration, but do not appear in the 5PM Running Order Configuration, will be reset.
When selecting this option a confirmation box will open:
Click Yes or No to apply the Configuration, or close the confirmation box
Load and Leave Missing Configuration Items as Currently Set
When applied any settings not in the 5PM Running Order Configuration, but which are in the
currently active Configuration will remain as they are. Any other settings will be overwritten.
When selecting this option a confirmation box will open:
Click Yes or No to apply the Configuration, or close the confirmation box
To Next Page
Loading...