Page | 37
If when trying to add a Local Prompter WP-IP cannot detect an external display to connect to, the
below message will be displayed:
Click CANCEL, or the close X, and check you monitor connections/monitor power.
Try the manually add Local Prompter procedure again.
The maximum number of display devices (Local or NDI) that can be added is 3.
If a user attempts to add an additional device, they will see the below message.
To add a new display device, delete an existing display device (Local or NDI).
Please Note: Disabling a display device in WP-IP will not enable addition of a new device, the existing
device must be deleted.
To Next Page
Loading...