Johnson Controls CK721-A User Manual

CK721-A User Interface CK721-A Installation and Operation
4-22 24-10349-8 Rev. B
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
Anti-Passback Time 0-1440
min
With Anti-Passback enabled (Y), set the time
here.
When time set to 0, and Anti-Passback is
en
abled (Y), this reader will reset the
Anti-Passback Time for all readers on this
panel for a card that has been granted access
locally.
Cardholder
Over
ride
Toggle If enabled (Y), a cardholder may override
access control at a keypad reader at this
terminal. The amount of time is programmed at
the keypad.
Note: Over
ride Warning Time and Override Warning Output Group (the next two
settings defined) work together: You can set up a time (Override Warning Time)
before an override expires at which a warning (such as an audible beep) will be
activated. The Override Warning Output Group setting assigns the output group
that will be activated at the Override Warning Time.
Override Warning
Ti
me
User Def. You can activate an output group as a warning
before the Cardholder Override expires. Enter
the amount of time here (0 - 10 minutes).
Override Warning
O
utput Group
User Def. Enter the number of the output group (1-600)
that will be activated for the Override Warning
Time. (0 means no group is assigned.)
When the output group is activated,
is will not
de-activate by itself. Additional settings, like
Timed Duration of each output point in the
group, is needed for automatic de-activation.
Terminal Timezone User Def. Values range from 0 - 64 (timezone numbers).
This
function sets a timezone for the terminal.
When the timezone is active, the terminal will
be able to grant access requests. (Timezones
are numbered 1 to 64; 0 means no timezone is
assigned.)
Terminal Override
Ti
mezone
User Def. Values range from 0 - 64 (timezone numbers).
A timezone that, when active, puts the terminal
into unrestricted access. (Timezones are
numbered 1 to 64; 0 means no timezone is
assigned.)
Table 4-6: Terminal Screen, Page 1
Field Type Description

Johnson Controls CK721-A Specifications

General

Brand	Johnson Controls
Model	CK721-A
Category	Controller
Language	English