Using a Keypad Reader on a Panel CK721-A Installation and Operation
F-4 24-10349-8 Rev. B
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
6. Make sure the terminal’s PIN + Card ID flag is not set.
7. To start Timed Override:
Without the Star Feature, enter the Card ID number, press the star (*) key,
enter the number of minutes, and press the # key.
With the Star Feature, enter the Card ID number, press the star (*) key
followed by number 0, enter the number of minutes, and press the # key.
8. To stop Timed Override:
Without the Star Feature, enter the Card ID number, press the star (*) key,
enter 0 (for minutes), and press the # key.
With the Star Feature, enter the Card ID number, press the star (*) key
followed by number 0, and press the # key.
To invoke Timed Override with PIN and Card ID:
1. The terminal’s Cardholder Override flag must be set.
2. The badge’s Override flag must be set.
3. Terminal’s PIN + Card ID flag must be set
4. Make sure the terminal’s PIN Only flag is not set.
5. To start Timed Override:
Without the Star Feature, enter PIN, enter the Card ID number, press the star
(*) key, enter the number of minutes, press the # key.
With the Star Feature, enter PIN, enter the Card ID number, press the star (*)
key followed by number 0, enter the number of minutes, and press the # key.
6. To stop Timed Override:
Without the Star Feature, enter PIN, enter the Card ID number, press the star
(*) key, enter 0 (for minutes), and press the # key.
With the Star Feature, enter the PIN, number, enter the Card ID number, press
the star (*) key followed by number 0, and press the # key.
To invoke Timed Override with PIN and Badge:
1. The terminal’s Cardholder Override flag must be set.
2. The badge’s Override flag must be set.
3. The terminal’s PIN Suppression Timezone must be set to an inactive zone.
4. Make sure the terminal’s Allow PIN After Badge flag is not set.
5. To start Timed Override:
Without the Star Feature, enter PIN, press the star (*) key, enter the number of
minutes, and present the badge.
With the Star Feature, enter PIN, press the star (*) key followed by number 0,
enter the number of minutes, and present the badge.
To Next Page
Loading...
