Return Format
The query reads the condition register and returns a decimal value which corresponds to the binary-
weighted sum of all bits set in the register (see table above). For example, if bit 3 (decimal value = 8 and bit
5 (decimal value = 32) are set (and the corresponding bits are enabled), this command will return +40.
Examples
The following example reads the condition register (bits 3 and 5 are set).
*STB?
Typical Response: +40
See Also
*SRE
Keysight 53220A/53230A Programmer's Reference 199
*STB?
To Next Page
Loading...
