Automatic Range Selection Count 100
Lower range value 0.0
Upper range value 0.0
Reading Format Configuration
Default/Factory Setting
Byte Order NORmal (MSB first)
Reading format ASCii
Phase format AUTO
Output Configuration
Default/Factory Setting
Polarity NORmal
State Disabled
Status Configuration
Default/Factory Setting
*SRE, *ESE enable masks Cleared at power-on.
Unaffected by *RST, SYSTem:PRESet or front panel reset.
QUEStionable and OPERational
register enable masks
Enabled at power-on and by STATus:PRESet.
Unaffected by *RST, SYSTem:PRESet or front panel reset.
System-Related Configuration
Default/Factory Setting
• Auto-level Frequency • 50.0
• Battery Enable • Disabled
• Reference Oscillator Source • Internal with AUTO enabled
• External Reference Frequency • 10 MHz
• Reference Oscillator
Standby Battery Power
• Disabled
• Power-up state
• Default (*RST state)
• Beeper • On
Display Mode Numeric
Unaffected by *RST or SYSTem:PRESet.
Display State On
Unaffected by *RST or SYSTem:PRESet.
Display Text Cleared
Unaffected by *RST or SYSTem:PRESet.
Reading Memory Cleared
Error Queue
Cleared at power on or by the *CLS command.
Unaffected by *RST, SYSTem:PRESet or front panel reset.
Keysight 53220A/53230A Programmer's Reference 493
Power-On and Reset State
To Next Page
Loading...
