Krone Comprima F 155 XC - 6.8 Operating the hydraulic blade group control system

Terminal machine functions 6
Operating the hydraulic blade group control system 6.8
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en 33
Icon Explanation
A
Swivel in (activate) blade group A
AB
Swivel in (activate) blade groups A and B
B
Swivel in (activate) blade group B
Swivel out (deactivate) blade groups A and B
Blade group A and B swivelled out and blade cassette is below to remove the
blades (deactivated)
This maintenance position is used, for example, in order to change the blades,
see chapter Maintenance, “Changing blades”.
Swivelling blade groups in/out
 To preselect the various functions of the blade group control system, press
A
,
AB
,
B
, or .
ð The icon changes. The current status of the blade group control system is shown in the
status display in the working screen.
After selecting the desired function of the blade group control system, a prompt is displayed
after approx. 2 seconds to swivel the blades in or out using the tractor hydraulics:
 Confirm the prompt in the display.
 Swivel the blades in or out using the tractor hydraulics.
The following prompts might be displayed:
Icon Explanation
32
Swivel in blade (activate)
33
Swivel out blade (deactivate)
INFORMATION
To counteract a crop blockage in the area of the blade as quickly as possible, both blade
groups as well as the blade cassette are always lowered when swivelling out the blades. This
way, the crops can be conveyed into the bale chamber without any resistance.