Krone Comprima F 155 XC - Page 356

8 Terminal error messages
8.1 Faults of the electrics/electronics
74
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en
Possible cause Remedy
FMI 19: There is a network/CAN error.
The wiring is faulty.
 Check wiring, refer to page73.
The operating terminal is de-
fective.
 Note the error number and the FMI. Then contact the
dealer.
520193-
KBT
KRONE operating terminal (KOT)
Possible cause Remedy
FMI 19: There is a network/CAN error.
The wiring is faulty.
 Check wiring, refer to page73.
The operating terminal is de-
fective.
 Note the error number and the FMI. Then contact the
dealer.
520194-
KBT
KRONE operating terminal (KOT)
Possible cause Remedy
FMI 19: There is a network/CAN error.
The wiring is faulty.
 Check wiring, refer to page73.
The operating terminal is de-
fective.
 Note the error number and the FMI. Then contact the
dealer.
520195-
KBT
KRONE operating terminal (KOT)
Possible cause Remedy
FMI 19: There is a network/CAN error.
The wiring is faulty.
 Check wiring, refer to page73.
The operating terminal is de-
fective.
 Note the error number and the FMI. Then contact the
dealer.
520198-
EEPROM
EEPROM of KRONE Machine Controller (KMC)
Possible cause Remedy
FMI 12: There is an internal error.
The control unit KMC is de-
fective.
 The control unit KMC is defective.
 Note the error number and the FMI. Then contact the
dealer.
521100-
High
Voltage group (UB1) of the KRONE Machine Controller (KMC)