Krone Comprima F 155 XC - Page 66

Technical data
66
Pos: 38.11 /BA/T echnische Daten/R undballenpr essen/Comprim aTechnische D aten Comprima V 210 XC_RP 025 @ 507\ mod_150052 9429390_78.doc x @ 3487980 @ @ 1
Comprima V 210 XC (with cutting unit)
Axle
Single axle
Tandem axle
Pick-up (width)
2150
Track width
2200/2400
Width
approx.
(depending
on the tyres)
500/50-17
2660
2895
500/55-20
2660
1
2800
2
--
Permissible weights
See information on the type plate
Length approx.
5529
Length with bale ejector
5865
Height approx.
3150 with standard tyres
bale size
Diameter approx.
1000–2050
Width approx.
1200
Power consumption approx.
51 kW (70 PS)
Drive speed (PTO shaft)
540 rpm
Maximum permissible operating
pressure of hydraulic system
200 bar
Min. oil quality
Oil ISO VG 46
Max. oil temperature
80° C
Hydraulic flow rate
min. 30 l/min
max. 60 l/min
Electrical supply
12 V (7-pin plug) for road lighting
Net
Max. width
1300 mm
Sleeve length
1250–1330 mm
Sleeve diameter
ø 75–80 mm
Roll diameter
max. 310 mm (3000 m roll)
Film
Max. width
1280 mm
Sleeve length
1295 mm
Sleeve diameter
ø 77,3 mm
Roll diameter
225 mm (2000 m roll)
Overload
protection
(universal
shaft)
Friction clutch (540
rpm)
--
Cam clutch (540 rpm)
2300 Nm
1
– braked single axle
2
– unbraked single axle
Pos: 38.12 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1