7: Networking
EMG™ Edge Management Gateway User Guide 114
Updating an IP Filter
To update an IP filter rule set:
1. From the Network > IP Filter page, the administrator selects the IP filter rule set to be edited
and clicks the Edit Ruleset button to return to the Network > IP Filter Ruleset (Adding/Editing
Rulesets) page (see Figure 7-9).
2. Edit the information as desired and click the Apply button.
Deleting an IP Filter
To delete an IP filter rule set:
1. On the Network > IP Filter page, the administrator selects the IP filter rule set to be deleted
and clicks the Delete Ruleset button.
IP Filter Commands
Go to IP Filter Commands to view CLI commands which correspond to the web page entries
described above.
To Next Page
Loading...
