Lantronix EMG Series User Manual

8: Services
EMG™ Edge Management Gateway User Guide 171
Services - Web Sessions
The Services > Web Server page enables you to view and terminate current web sessions.
To view or terminate current web sessions:
1. On the Services tab, click the Web Server page and click the Web Sessions link to the right.
The following page displays:
Figure 8-12 Web Server - Web Sessions
2. To terminate, click the check box in the row of the session you want to terminate and click the
Terminate button.
3. To return to the Services > Web Server page, click the Back to Web Server link.
ConsoleFlow
ConsoleFlow is a cloud or on-premise portal for the centralized management of multiple Lantronix
ITM devices. A browser based interface (including mobile phone app support) allows an
administrator to view status, send commands, view logs and charts and update firmware. Each
Lantronix device can communicate with the cloud server or on-premise server, sending status
updates and responding to commands sent by the server.
An EMG gateway requires a unique Device ID to communicate with the ConsoleFlow portal. The
ID is viewable in the ConsoleFlow settings. If a device is not already pre-configured with the ID, the
ID must be provisioned using Lantronix Provisioning Manager (LPM). See the Lantronix
Provisioning Manager User Guide at https://www.lantronix.com/products/lantronix-provisioning-
manager/.
The ConsoleFlow client follows a sequence of steps to connect to the ConsoleFlow server, send
status updates, check for firmware and configuration updates, and respond to commands from the
server. This series of steps is the same each time the client starts - at EMG boot, or if the client is
enabled. Any changes to the ConsoleFlow Device ID, Registration settings or Messaging settings
require the ConsoleFlow client to be disabled and re-enabled for the changes to take effect.
1. Registration
The client will attempt to register to the Registration Host using the Project Tag and Device
ID. If registration fails, the client will wait 30 seconds and retry. The client will retry until it is
successful, or the client is disabled. Registration may fail if the Project Tag is invalid, the

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English