8: Services
EMG™ Edge Management Gateway User Guide 157
NFS Mounts
3. Enter the following:
SMB/CIFS Share
4. To save, click the Apply button.
5. Click the Firmware & Configurations link to access the
Firmware & Configurations (on page 331) to save EMG configuration, as desired.
NFS and SMB/CIFS Commands
Go to NFS and SMB/CIFS Commands to view CLI commands which correspond to the web page
entries described above.
Remote Directory The remote NFS share directory in the format:
nfs_server_hostname or ipaddr:/exported/path
Local Directory The local directory on the EMG on which to mount the remote directory. The EMG
unit creates the local directory automatically.
Read-Write If enabled, indicates that the EMG can write files to the remote directory. If you plan
to log port data or save configurations to this directory, you must enable this option.
Mount Select the checkbox to enable the EMG unit to mount the file to the NFS server.
Disabled by default.
Mounted Indicates if the EMG was able to successfully mount the NFS share directory.
Share SMB/CIFS
directory
Select the checkbox to enable the EMG to export an SMB/CIFS share called “public.”
Disabled by default.
Network
Interfaces
Select the network ports from which the share can be seen. The default is for the share
to be visible on both network ports.
CIFS User
Password/Retype
Password
Only one user special username (cifsuser) can access the CIFS share. Enter the CIFS
user password in both password fields. The default user password is CIFSPASS.
More than one user can access the share with the cifsuser user name and password
at the same time.
Workgroup The Windows workgroup to which the EMG unit belongs. Every PC exporting a CIFS
share must belong to a workgroup. Can have up to 15 characters.
To Next Page
Loading...
Need help?
General
