3: EMG 8500 Installation
EMG™ Edge Management Gateway User Guide 52
Modem Installation
Note: Modem installation information applies when the dial up modem module is
installed in the EMG unit.
Caution: TO REDUCE THE RISK OF FIRE, USE ONLY NO. 26 AWG OR LARGER
(e.g., 24 AWG) UL LISTED OR CSA CERTIFIED TELECOMMUNICATION
LINE CORD.
Attention: POUR RÉDUIRE LES RISQUES D'INCENDIE, UTILISER UNIQUEMENT DES
CONDUCTEURS DE TÉLÉCOMMUNICATIONS 26 AWG AU DE SECTION
SUPÉRLEURE.
Warning: RISK OF ELECTRICAL SHOCKS; DISCONNECT ALL POWER AND
PHONE LINES BEFORE SERVICING!
Caution: DEVICES INSIDE THE EQUIPMENT AND THE MODEM ARE
ELECTROSTATIC -SENSITIVE; DO NOT HANDLE EXCEPT AT A STATIC
FREE WORKPLACE.
To Next Page
Loading...
