Lantronix EMG Series User Manual

8: Services
EMG™ Edge Management Gateway User Guide 176
Messaging Host
3. To save, click Apply.
ConsoleFlow Commands
Go to ConsoleFlow Commands (on page 394) to view CLI commands which correspond to the
web page entries described above.
Messaging Host Hostname of the server used for messaging services. The hostname should
start with mqtt.
Messaging Port The TCP port on the Messaging Host. Defaults to 443.
Messaging Services
Security
If enabled, TLS is used for messaging. If Validate certificates with HTTPS is
enabled for the Registration Host, a certificate authority will be used to validate
the HTTPS certificates used for TLS. Enabled by default.
Messaging Services If enabled, messaging services are used for status updates and commands.
Enabled by default.
Messaging Host Hostname of the server used for messaging services. The hostname should
start with mqtt.
Messaging Port The TCP port on the Messaging Host. Defaults to 443.
Messaging Services
Security
If enabled, TLS is used for messaging. If Validate certificates with HTTPS is
enabled for the Registration Host, a certificate authority will be used to validate
the HTTPS certificates used for TLS. Enabled by default.

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English