Lantronix EMG Series

17: Command Reference
EMG™ Edge Management Gateway User Guide 416
diag wlan interfacelog clear
Display access point status, including connected clients:
diag wlan apstatus
Display access point log:
diag wlan aplog [timestamps <epoch|local>]
[display <head|tail>] [numlines <Number of Lines>]
Clear the access point log:
diag wlan aplog clear
Events Commands
admin events add
Syntax
admin events add <trigger> <response>
<trigger> is one of:
dpdatadrop, humidlimit, pingfails, receivetrap, dioportchange,
dioportabnormal, rpmload, nomodemdial, or templimit.
<response> is one of:
action syslog
action emailalert emailaddress <destination email address>
action snmptrap nms <SNMP NMS> community <SNMP Community>
action diorelayon
action <fwdalltrapseth|fwdseltrapeth> ethport <1|2|cell> nms <SNMP
NMS>
community <SNMP Community> [oid <SNMP OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> deviceport <Device Port #
or Name> nms <SNMP NMS> community <SNMP Community>
[oid <SNMP Trap OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> usbport <U1>
nms <SNMP NMS> community <SNMP Community> [oid <SNMP Trap OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> internal modem
nms <SNMP NMS> community <SNMP Community> [oid <SNMP Trap OID>]
Description
Manages the response to events that occur in the EMG.