15: Maintenance
EMG™ Edge Management Gateway User Guide 356
Events Commands
Go to Events Commands to view CLI commands which correspond to the web page entries
described above.
Banners
The Maintenance > Banners page allows the system administrator to customize text messages
that display to users.
To configure banner settings:
1. Click the Maintenance tab and select Banners option.
Figure 15-14 Maintenance > Banners
2. Enter the following fields.
Welcome Banner The text to display on the command line interface before the user logs in. May
contain up to 1024 characters. Single quote and double quote characters are not
supported. Welcome to the EMG is the default.
Note: To create more lines use the \n character sequence.
Login Banner The text to display on the command line interface after the user logs in. May
contain up to 1024 characters. Single quote and double quote characters are not
supported. Default is blank.
Note: To create more lines, use the \n character sequence.
Logout Banner The text to display on the command line interface after the user logs out. May
contain up to 1024 characters. Single quote and double quote characters are not
supported. Default is blank.
Note: To create more lines use, the \n character sequence.
To Next Page
Loading...
