17: Command Reference
EMG™ Edge Management Gateway User Guide 387
NIS Commands
set nis
Syntax
set nis <one or more parameters>
Parameters
allowdialback <enable|disable>
broadcast <enable|disable>
clearports <Port List>
custommenu <Menu Name>
dialbacknumber <Phone Number>
dataports <Port List>
domain <NIS Domain Name>
breakseq <1-10 Chars>
escapeseq <1-10 Chars>
group <default|power|admin>
listenports <Port List>
master <IP Address or Hostname>
permissions <Permission List>
Note: See User Permissions Commands on page 390 for information on groups and
user rights.
slave1 <IP Address or Hostname>
slave2 <IP Address or Hostname>
slave3 <IP Address or Hostname>
slave4 <IP Address or Hostname>
slave5 <IP Address or Hostname>
state <enable|disable>
Description
Configures the EMG to use NIS to authenticate users who log in via the Web, SSH, Telnet, or the
console port.
show nis
Syntax
show nis
Description
Displays NIS settings.
To Next Page
Loading...
