Lantronix EMG Series User Manual

14: User Authentication
EMG™ Edge Management Gateway User Guide 328
Custom Menus
Users can have custom user menus as their command line interface, rather than the standard CLI
command set. Each custom user menu can contain up to 50 commands ('logout' is always the last
command). Instead of typing each command, the user enters the number associated with the
command. Each command can also have a nickname associated with it, which can be displayed in
the menu instead of the command. The commands showmenu <Menu Name> and returnmenu
can be entered to display another menu from a menu, or to return to the prior menu. The
command returncli can be used to break out of a menu and return to the regular CLI.
To add a custom menu:
1. Click the User Authentication tab and select the Custom Menus option. The Custom Menus
page displays:
Figure 14-13 User Authentication > Custom Menus
2. In the lower section of the page, enter the following:

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English