Lantronix EMG Series User Manual

2: Introduction
EMG™ Edge Management Gateway User Guide 27
Product Information Label
The product information label on the unit contains the following information about the specific unit:
 QR Code
 Product Part Number
 Product Revision
 Manufacturing Date Code
 Country of Manufacturing Origin
 Hardware Address (MAC address or serial number)
 Device ID (used to connect to ConsoleFlow central management software)
Figure 2-3 Product Label (EMG 8500 shown)
Product Part Number
Product Revision
Country of
Manufacturing Origin
Serial Number
Device ID
(ConsoleFlow)
Manufacturing
Date Code
QR Code

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English