Lantronix EMG Series User Manual

17: Command Reference
EMG™ Edge Management Gateway User Guide 421
set ipfilter mapping
Syntax
set ipfilter mapping <parameters>
Parameters
ethernet <1|2|cell|wlan|ap|bond0> state <disable>
ethernet <1|2|cell|wlan|ap|bond0> state <enable> ruleset <Ruleset Name>
deviceport <1..48> state <disable>
deviceport <1..48> state <enable> ruleset <Ruleset Name>
usbport <U1> state <disable>
usbport <U1> state <enable> ruleset <Ruleset Name>
internal modem state <disable>
internal modem state <enable> ruleset <Ruleset Name>
Description
Maps an IP filter to an interface.
set ip filter rules
Syntax
set ipfilter rules <parameters>
Parameters
add <Ruleset Name>
delete <Ruleset Name>
edit <Ruleset Name> <Edit Parameters>
Edit Parameters
append
insert <Rule Number>
replace <Rule Number>
delete <Rule Number>
Description
Sets IP filter rules.
Logging Commands
set deviceport port
Syntax
set deviceport port <Device Port List or Name> <one or more deviceport
parameters>

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English