Lantronix EMG Series

17: Command Reference
EMG™ Edge Management Gateway User Guide 418
Groups Commands
set groups add|edit <Group Name> [<parameters>]
Syntax
set groups add|edit <Group Name> [<parameters>]
Parameters
dataports <Port List>
listenports <Port List>
clearports <Port List>
escapeseq <1-10 Chars>
breakseq <1-10 Chars>
custommenu <Menu Name>
displaymenu <enable|disable>
allowdialback <enable|disable>
dialbacknumber <Phone Number>
permissions <Permission List>
Note: See 'help user permissions' for information on user rights.
Rename a group:
set groups rename <Group Name> newname <New Group Name>
Delete a group:
set groups delete <Group Name>
Show one or more groups:
show groups [name <Group Name>] members <enable|disable>
Description
Configure custom group attributes.
Host List Commands
set hostlist add|edit <Host List Name>
Syntax
set hostlist add|edit <Host List Name> [<parameters>]
Parameters
name <Host List Name> (edit only)
retrycount <1-10>
Default: retrycount=3, auth=enable.