Name: Lantronix EMG Series
Brand: Lantronix
Rating: 4 (1 reviews)

To Next Page

To Previous Page

9: USB/SD Card Port

EMG™ Edge Management Gateway User Guide 178

Figure 9-1 Devices > USB / SD Card

To configure a USB/SD card storage port:

1. Insert any of the supported storage devices into the USB port or the SD card slot on the front

of the EMG unit.

2. Click the USB/SD Card tab. Figure 9-1 shows the page that displays.

3. Click the radio button (on the far right) of a USB or SD card device storage port.

4. Click Configure.

- Figure 9-2 shows the page that displays if a USB storage device is inserted.

- Figure 9-3 shows the page that displays if an SD Card is inserted.

Other manuals for Lantronix EMG Series

Questions and Answers:

Need help?

Do you have a question about the Lantronix EMG Series and is the answer not in the manual?

General