Lantronix EMG Series User Manual

7: Networking
EMG™ Edge Management Gateway User Guide 146
FQDN List
Use the FQDN List (FQDN stands for fully qualified domain name) to add static hostname entries
to the local hosts table so that the EMG can resolve hostnames that are not resolved via DNS.
To add/edit/delete hosts:
1. Click the Network tab and select FQDN List. The following page appears:
Figure 7-18 FQDN List
2. Enter the following information:
- To add a Host, enter the IP address, FQDN, and click Add/Edit Hosts. The IP address
and hostname displays in the Hosts/FQDN List. You may add up to 15 hosts.
- To edit a Host entry, select the radio button next to the host in the Hosts/FQDN List,
change the IP address or FQDN fields as desired, and click Add/Edit Hosts.
- To delete a Host, select the radio button next to the host in the Hosts/FQDN List and click
Delete Host.
3. Click Apply.

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English