17: Command Reference
EMG™ Edge Management Gateway User Guide 449
USB Device Commands
show usb devices
Syntax
show usb devices
Description
Displays all usb devices with the port each device is connected to.
diag usb
Syntax
diag usb [<parameters>]
Parameters
treedisplay <enable|disable>
mapdevice <enable|disable>
email <Email Address>
Defaults: treedisplay=enable
Description
Displays information about USB buses and the devices connected to them, including the mapping
between a USB device and the EMG port.
Note: For "mapdevice enable", the port names will displayed at the end of the line in
square brackets. To see a list of USB devices with vendor id and product id, use
'treedisplay disable'.
USB Storage Commands
set usb storage dir
Syntax
set usb storage dir <U1> [subdir <Directory Path>]
Description
Views a directory listing of a USB flash drive.
To Next Page
Loading...
