Lantronix EMG Series

17: Command Reference
EMG™ Edge Management Gateway User Guide 424
show log modem [display <head|tail>][numlines <Number of Lines>]
show log local
Syntax
show log local
Description
View the log for local, NFS, or USB logging (NFS and USB use the current logging settings for the
Device Port). Default is to show the log tail:
show log local|nfs|usb|sdcard|intsd <Device Port # or Name>
[<parameters>]
Parameters
display <head|tail>
numlines <Number of Lines>
bytes <Bytes to Display>
startbyte <Byte Index>
logfile <NFS, USB or SD card Log File>
Defaults: bytes=1000, startbyte=1, numlines=40
Lists the NFS, USB, or SD card log files, either for a specific device port, or all log files in a USB,
NFS, or SD card location:
show log files nfs|usb|sdcard|intsd [localdir <NFS Mount Local
Directory>]
[usbport <U1>]
[deviceport <Device Port # or name>]
Network Commands
set network
Syntax
set network <parameters>
Parameters
startprobes <1-99999 Seconds>
probes <Number of Probes>
interval <1-99999 Seconds>
ipforwarding <enable|disable>
ip6forwarding <enable|disable>
Description
Sets TCP Keepalive and IP Forwarding network parameters.