Lantronix EMG Series User Manual

14: User Authentication
EMG™ Edge Management Gateway User Guide 292
the About EMG page or run the CLI admin version command and look for the following in the
result:Admin Password Unique to Device: enabled (or disabled). If that string is
absent from the result or the result is set to “disabled”, it indicates that the device doesn’t support
the device-unique sysadmin password.
Note: It is recommended that you change the default password on initial setup. The
password should be recorded and stored in a secure place accessible by at least two
authorized system administrators. To change the sysadmin password, see the next topic.
Adding, Editing or Deleting a User
Through this User Authentication > Local/Remote Users page, you can delete a user listed in the
table or open a page for adding or editing a user.
To add a user:
1. On the User Authentication > Local/Remote Users, click the Add/Edit User button. The User
Authentication > Local/Remote User Settings page displays.

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English