Lantronix EMG Series User Manual

10: Device Ports
EMG™ Edge Management Gateway User Guide 224
Sites
A site is a group of site-oriented modem parameters (or modem profile) that can be activated by
various modem-related events (authentication on dial-in, outbound network traffic for a dial-on-
demand connection, etc.). The site parameters will override parameters that are configured for a
modem.
To use sites with a modem, create one or more sites (described below), then enable Use Sites for
the modem. Sites can be used with the following modem states: dial-in, dial-back, CBCP Server,
dial-on-demand, dial-in & dial-on-demand, and dial-back & dial-on-demand. For more information
on how sites are used with each modem state, see Modem Dialing States on page 227.
To add a site:
1. Click the Devices tab and select the Sites option. The Sites page displays:
Figure 10-15 Devices > Sites
2. In the lower section of the page, enter the following:

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English