7: Networking
EMGâ„¢ Edge Management Gateway User Guide 90
Advanced Cellular Gateway Configuration
Admin Login and
Password/Retype
For the selected Fail-over Device, the administrator login and password used to
retrieve status from the device and send configuration updates to the device. The
login may have up to 32 characters, and the password may have up to 64
characters. The Admin Password displays the current password masked.
Default login credentials of the Lantronix PW HSPA+:
Admin login name: admin
Admin password: PASS
Default login credentials of the Sierra Wireless ES450:
Admin login name: user
Admin password: 12345
Change Admin
Password (check
box)
Select this check box if you wish to update the admin password for the selected
gateway Fail-over Device.
New Admin
Password/Retype
For the selected Fail-over Device, the administrator password can be changed on
the gateway. The password may have up to 64 characters.
To change the Admin Password, click the Change Admin Password checkbox and
enter the new password in the New Admin Password and Retype fields. Changing
the HSPA+ Admin password will save the password on the EMG for status and
configuration queries to the HSPA+ gateway. The password must match what is
stored on the HSPA+ gateway. Changing the Sierra Admin password will save the
password on the EMG for status and configuration queries to the Sierra gateway.
The new password will also be configured on the Sierra gateway. The Sierra
gateway login must be set as ‘user’.
Reboot Gateway
When Making
Changes (check
box)
Select this check box if you wish to reboot the selected fail-over device when
making changes.
Fail-Over Cellular
Gateway Status
(link)
Clicking the link opens the Fail-Over Cellular Gateway status window, showing
status and statistics about the fail-over gateway.
Click Back to Network Settings to return to the Network Settings page.
SIM Card PIN Lock
(check box)
For the HSPA+ and Sierra gateways, enable a lock so that the SIM card used by the
gateway cannot be used by anyone who does not have the PIN.
Pin # for SIM Card/
Retype
For the HSPA+ and Sierra gateways, the PIN number for the SIM card used by the
gateway. May have up to 8 characters.
SIM PUK/Retype For the HSPA+ gateway, the SIM Personal Unblocking Key (PUK). May have up to
16 characters. The Sierra gateway does not have this feature.
SIM Username For the HSPA+ gateway, enter the username for dial up to the cellular carrier, if
required. May have up to 64 characters. The Sierra gateway does not have this
feature.
SIM Password For the HSPA+ gateway, enter the password for dial up to the cellular carrier, if
required. May have up to 64 characters. The Sierra gateway does not have this
feature.
Dial-up String For the HSPA+ gateway, enter the modem string used for making a connection to
the carrier. May have up to 64 characters. The Sierra gateway does not have this
feature.
Roaming For the HSPA+ gateway, enable or disable network roaming. The Sierra gateway
does not have this feature.
To Next Page
Loading...
Need help?
General
