15: Maintenance
EMG™ Edge Management Gateway User Guide 343
3. Click the View Log button. Your specified system log displays. For example, if you select the
type All and the level Error, the EMG unit displays a log similar to this:
Figure 15-4 View System Logs
From a queried system log (e.g., Figure 15-4), you may email this information to a specific
individual or to Lantronix Technical Support. See Emailing Logs and Reports (on page 352).
To clear system logs:
1. From the Maintenance > System Logs page, select Maintenance - System Logs.
2. Click the Clear Log button to clear all log information.
System Log Commands
Go to System Log Commands to view CLI commands which correspond to the web page entries
described above.
Ending at Select the endpoint of the range you want to view:
End of Log: to view the log from the latest available ending time and date.
Date: to view the log up to the last available log ending date and time.
To Next Page
Loading...
Need help?
General
