17: Command Reference
EMG™ Edge Management Gateway User Guide 440
Description
Display the results for the last completed custom script operation or a selected operation, and
optionally email the results.
SD Card Commands
Enables or disables access to SD Card devices:
set sdcard access <enable|disable>
Mounts a SD Card for use as a storage device. The SD Card can be used for saving
configurations, firmware updates and device logging.
set sdcard mount
Unmounts a SD Card:
set sdcard unmount
Formats a SD Card:
set sdcard format [filesystem <ext2|fat16|fat32|ntfs>]
Defaults: filesystem=ext2
Runs a filesystem check on a SD Card (recommended if it does not mount):
set sdcard fsck
Displays a directory listing of an internal or external SD Card:
set sdcard|intsd dir [subdir <Directory Path>]
Renames a file on a SD Card:
set sdcard rename <Filename> newfile <New Filename>
Copies a file on a SD Card:
set sdcard copy <Filename> newfile <New Filename>
Removes a file on a SD Card:
set sdcard delete <Current Filename>
Displays information about the SD Card device:
show sdcard
Security Commands
set security
Description
Configures EMG security and FIPS settings.
Note: FIPS functionality is not available in the current release.
To Next Page
Loading...
Need help?
General
