10: Device Ports
EMG™ Edge Management Gateway User Guide 211
Internal Modem Settings
This section describes how to configure an internal modem in the EMG. The EMG internal modem
is an optional part. If the modem is installed, a message will be displayed when the unit boots:
Internal modem installed.
The presence of the modem will also be displayed in the CLI admin version command, the
web About EMG page, and the System Configuration report. The internal modem provides a
subset of the modem functionality available for modems connected to a Device Port and USB
modems. If the internal modem is installed, the Internal Modem web page can be displayed by
selecting the Internal Modem option from the main menu, or by selecting the MD button in the
Sample Dashboards on the upper right corner of the web page.
Note: The internal modem only supports Dial-in, Dial-out, Dial-back and Dial-on-
Demand.
To enter settings for the internal modem:
1. From the Devices menu, select Internal Modem. The Internal Modem page displays.
To Next Page
Loading...
Need help?
General
