Lantronix EMG Series User Manual

14: User Authentication
EMG™ Edge Management Gateway User Guide 318
Figure 14-10 User Authentication > Groups
2. Enter the following:
Group Name Enter a name for the group.
Listen Ports
The ports users are able to monitor using the
connect listen
command.
Data Ports The ports users are able to monitor and interact with using the connect direct
command. U1 denotes the USB port on the front of the EMG unit.
Clear Port Buffers
The ports whose port buffer users may clear using the
set locallog
clear
command.
Enable for
Dial-back
Select to grant a user. Users with dial-back access can dial into the EMG
unit and enter their login and password. Once the EMG authenticates them,
the modem hangs up and dials them back. Disabled by default.
Dial-back Number The phone number the modem dials back on depends on this setting for the
device port. The user is either on a fixed number, or on a number that is
associated with the user’s login (specified here).

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English