Lantronix EMG Series User Manual

17: Command Reference
EMG™ Edge Management Gateway User Guide 450
set usb storage fsck
Syntax
set usb storage fsck <U1>
Description
Runs a file system check on a thumb drive (recommended if it does not mount).
set usb storage format
Syntax
set usb storage format <U1> [filesystem <ext2|fat16|fat32>]
Description
Formats a USB flash drive.
set usb storage mount
Syntax
set usb storage mount <U1>
Description
Mounts a USB flash drive in the EMG for use as a storage device.
The USB flash drive must be formatted with an ext2 or FAT file system before you mount it.
set usb storage unmount
Syntax
set usb storage unmount <U1>
Description
Unmounts a USB flash drive. Enter this command before removing the USB device.
set usb storage rename
Description
Renames a file on a thumb drive.
Syntax
set usb storage rename <U1> file <Filename> newfile <New Filename>

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English