Lantronix EMG Series User Manual

17: Command Reference
EMG™ Edge Management Gateway User Guide 419
auth <enable|disable>
Description
Configures a prioritized list of hosts to be used for modem dial-in connections.
set hostlist add|edit <Host List Name> entry
Syntax
set hostlist add|edit <Host List Name> entry <Host Number>
[<parameters>]
Parameters
host <IP Address or Name>
protocol <ssh|telnet|tcp>
port <TCP Port>
escapeseq <1-10 Chars>
Description
Adds a new host entry to a list or edit an existing entry.
set hostlist edit <Host List Name> move
Syntax
set hostlist edit <Host List Name> move <Host Number> position <Host
Number>
Description
Moves a host entry to a new position in the host list.
set hostlist delete
Syntax
set hostlist delete <Host List> [entry <Host Number>]
Description
Deletes a host list, or a single host entry from a host list.
show hostlist
Syntax
show hostlist <all|names|Host List Name>

Lantronix EMG Series Specifications

General

Brand	Lantronix
Model	EMG Series
Category	Gateway
Language	English