17: Command Reference
EMG™ Edge Management Gateway User Guide 415
diag traceroute
Syntax
diag traceroute <IP Address or Hostname>
Description
Displays the route that packets take to get to a network host.
diag usb
Syntax
diag usb [<parameters>]
Description
To display information about USB buses and the devices connected to them, including the
mapping between a USB device and the EMG port. For "mapdevice enable", the port numbers will
displayed at the end of the line in square brackets.
Parameters
treedisplay <enable|disable>
mapdevice <enable|disable>
email <Email Address>
Defaults: treedisplay=enable
diag wlan
Synopsis
Display boot log messages related to wireless devices:
diag wlan bootlog
Display device capabilities:
diag wlan capabilities
Display available channels:
diag wlan channels
Display country / regional information:
diag wlan region
Display driver information:
diag wlan driver
Display wireless interface log:
diag wlan interfacelog [timestamps <epoch|local>]
[display <head|tail>] [numlines <Number of Lines>]
Clear the wireless interface log:
To Next Page
Loading...
Need help?
General
