17: Command Reference
EMG™ Edge Management Gateway User Guide 414
Syntax
diag perfstat [ethport <1|2>] [deviceport <Device Port # or Name>]
diag ping|ping6
Description
Verifies if the EMG can reach a host over the network.
diag ping|ping6 <IP Address or Name> [<parameters>]
Parameters
count <Number Of Times To Ping>
packetsize <Size In Bytes>
ethport <1|2>
Defaults: count=5, packetsize=64
diag sendpacket host
Description
Generate and send Ethernet packets.
Syntax
diag sendpacket host <IP Address or Name> port <TCP or UDP Port Number>
[string <Packet String>] [protocol <tcp|udp>]
[count <Number of Packets>]
diag top
Syntax
diag top [parameters]
Description
Displays CPU usage, memory usage and tasks.
Parameters
continuous <enable|disable>
count <Number of Iterations to Display>
delay <Delay in Seconds>
numlines <Number of Lines to Display>
Defaults:
count=1, delay = 5 seconds
To Next Page
Loading...
