17: Command Reference
EMG™ Edge Management Gateway User Guide 369
admin config rename <Config Name> location <local|nfs|cifs|usb|sdcard>
[usbport <U1>] [nfsdir <NFS Mounted Directory>]
Description
Deletes or renames a configuration.
admin config factorydefaults
Syntax
admin config factorydefaults [savesshkeys <enable|disable>] [savesslcert
<enable|disable>] [preserveconfig <Config Params to Preserve>]
[savescripts <enable|disable>]
<Config Params to Preserve> is a comma-separated list of current configuration
parameters to retain after the config restore or config factorydefaults:
Description
Restores the EMG unit to factory default settings.
admin config restore
Syntax
admin config restore <Config Name>
location <local|ftp|sftp|nfs|cifs|usb|sdcard|intsd>
[nfsdir <NFS Mounted Directory>] [usbport <U1>]
[savesshkeys <enable|disable>][savesslcert <enable|disable>]
<Config Params to Preserve> is a comma-separated list of current configuration
parameters to retain after the config restore or factorydefaults:
nt
Networking
sv
Services
dt
Date/Time
lu
Local Users
dp
Device Ports
ra
Remote Authentication
ub
USB Port/SD Card
nt
Networking
sv
Services
dt
Date/Time
lu
Local Users
ra
Remote Authentication
dp
Device Ports
ub
USB Port/SD Card
To Next Page
Loading...
Need help?
General
