17: Command Reference
EMG™ Edge Management Gateway User Guide 404
Parameters
date <MMDDYYhhmm[ss]>
timezone <Time Zone>
Note: If you do not know a valid <Time Zone>, enter 'timezone <invalid time zone>' and
you will be guided through selecting one from the available time zones.
Description
Sets the local date, time, and local time zone (one parameter at a time).
show datetime
Syntax
show datetime
Description
Displays the local date, time, and time zone.
set ntp
Syntax
set ntp <one or more ntp parameters>
Parameters
localserver1 <IP Address or Hostname>
localserver2 <IP Address or Hostname>
localserver3 <IP Address or Hostname>
poll <local|public>
publicserver <IP Address or Hostname>
state <enable|disable>
sync <broadcast|poll>
Description
Synchronizes the EMG with a remote time server using NTP.
show ntp
Syntax
show ntp
Description
Displays NTP settings.
To Next Page
Loading...
