17: Command Reference
EMG™ Edge Management Gateway User Guide 427
Parameters
state <dhcp|bootp|static|disable> [ipaddr <IP Address> mask <Mask>]
ipv6addr <IPv6 Address/Prefix>
mode <auto|10mbit-half|100mbit-half|10mbit-full|100mbit-full|
1000mbit-full>
mtu <Maximum Transmission Unit>
activeport <rj45|sfp>
set network ipv6 <enable|disable>
Description
Displays DNS settings.
show network dns
Syntax
show network dns
Description
Displays DNS settings.
show network gateway
Syntax
show network gateway
Description
Displays gateway settings.
show network host
Syntax
show network host
Description
Displays the network host name of the EMG.
show network port
Syntax
show network port <1|2>
To Next Page
Loading...
