Lantronix EMG Series

17: Command Reference
EMG™ Edge Management Gateway User Guide 447
show connections connid
Syntax
show connections connid <Connection ID> [email <Email Address>]
Description
Provides details, for example, endpoint parameters and trigger, for a specific connection.
Optionally emails the displayed information.
Note: Use the basic show connections command to obtain the Connection ID.
show portcounters
Syntax
show portcounters [deviceport <Device Port List or Name>]
[email <Email Address>]
Description
Generates a device port statistics report for one or more ports. Optionally emails the displayed
information.
show portstatus
Syntax
show portstatus [deviceport <Device Port List or Name>] [email <Email
Address>]
Description
Displays device port modes and states for one or more ports. Optionally emails the displayed
information.
show sysconfig
Syntax
show sysconfig [display <basic|auth|devices>] [email <Email Address>]
Description
Displays a snapshot of all configurable parameters. Optionally emails the displayed information.
show sysstatus
Syntax
show sysstatus [email <Email Address>]