Lantronix EMG Series

17: Command Reference
EMG™ Edge Management Gateway User Guide 454
ikeenc <any|3des|aes|aes192|aes256>
ikeauth <any|sha1|md5|sha2_256|sha2_384|sha2_512>
ikedhgroup <any|dh2|dh5|dh14|dh15|dh16|dh17|dh18|dh19>
ikever <any|ikev1|ikev2>
espenc <any|3des|aes|aes192|aes256>
espauth <any|sha1|md5|sha2_256|sha2_512|sha2_256_96>
espdhgroup <any|dh2|dh5|dh14|dh15|dh16|dh17|dh18|dh19>
lifetime <SA Lifetime in Seconds (3600) or Bytes with ‘b’ suffix (3600b)>
xauthclient <enable|disable>
xauthlogin <User Login>
ciscounity <enable|disable>
modeconfig <push|pull>
forceencaps <enable|disable>
deadpeerdelay <disable|1-300 seconds>
deadpeertimeout <5-1200 seconds>
deadpeeraction <restart|hold|clear>
tunnelrestart <enable|disable>
email <Email Address>
Enter Pre-Shared Key of remote host:
set vpn key
Enter XAUTH password (any extra parameters will be ignored):
set vpn xauthpassword
Configure X.509 certificate for remote peer or local peer.
set vpn certificate local via <sftp|scp> rootfile <Cert Authority File>
certfile <Certificate File> keyfile <Private Key File>
host <IP Address or Name> login <User Login> [path <Path to Files>
set vpn certificate remote via <sftp|scp> [rootfile
<Cert Authority File>
certfile <Certificate File> host <IP Address or Name>
login <User Login> [path <Path to Files>]
Delete X.509 certificate for local and/or remote peer.
set vpn certificate delete
Generate RSA Key for the EMG (any extra parameters will be ignored):
set vpn genrsakey
set vpn peerrsaaction upload via <sftp|scp> host <IP address or Name>
login <User Login> rsafile <rsa key file>
[path <Path to key file>]
set vpn peerrsaaction delete
Display all VPN settings and current status:
show vpn [email <Email Address>]
Display detailed VPN status:
show vpn status [email <Email Address>]
Display VPN logs:
show vpn viewlog [numlines <Number of Lines] [email <Email Address>]