Lantronix EMG Series

17: Command Reference
EMG™ Edge Management Gateway User Guide 456
encryption <any|ccmp|tkip>
ipaddr <IP Address> mask <Mask>
dhcpstartaddr <Starting IP Address> dhcpendaddr <Ending IP Address>
Set the access point WPA/WPA2 pre-shared key (any extra parameters are ignored):
set wlan accesspoint wpapsk
Create, edit, rename or delete a custom WLAN profile:
set wlan profile <add|edit> <Profile Name> <parameters>
Parameters
networkname <Network Name>
state <enable|disable>
priority <Profile Priority 1-4, lower number is lower priority>
auth <none|wep|wpa-wpa2>
[wepauth <open|shared>] [wepkeytype <passphrase|hex>]
[wepkeylength <40|104>] [weptxkeyindex <1|2|3|4>]
[wpaauth <psk|802.1x>] [wpakeytype <passphrase|hex>]
[wpaencryption <any|ccmp|tkip>]
[wpa802eap <eap-tls|eap-ttls|peap|fast|leap>]
[wpa802username <User Name>]
[wpa802ttlsauth <eap-mschapv2|mschapv2|mschap|chap|pap|eap-md5>]
[wpa802peapauth <eap-mschapv2|eap-md5|eap-tls>]
[wpa802fastauth <mschapv2|md5|gtc>]
[wpa802fastprovision <unauth|auth|both>]
[wpa802validatecert <enable|disable>]
Configure certificate files for a WPA-WPA2 802.1X profile:
set wlan profile edit <Profile Name> certificate import via <sftp|scp>
host <IP Address or Name> login <User Login> [path <Path to
Files>]
[certfile <Certificate File> keyfile <Private Key File>]
[rootfile <CA Certificate>]
set wlan profile edit <Profile Name> certificate delete
set wlan profile rename <Profile Name> newname <New Profile Name>
set wlan profile delete <Profile Name>
Configure the WEP PSK, WEP keys, WPA/WPA2 PSK or key, and 802.1x password:
set wlan profile weppsk <Profile Name>
set wlan profile wepkey1 <Profile Name>
set wlan profile wepkey2 <Profile Name>
set wlan profile wepkey3 <Profile Name>
set wlan profile wepkey4 <Profile Name>