17: Command Reference
EMG™ Edge Management Gateway User Guide 459
set xmodem send/receive
Syntax
set xmodem send <Device Port # or Name> file <Xmodem File>
protocol <xmodem|ymodem|zmodem> xfer <binary|ascii>
set xmodem receive <Device Port # or Name> [file <Xmodem File>]
protocol <xmodem|ymodem|zmodem> xfer <binary|ascii>
[overwrite <enable|disable>]
Description
Send or receive files with Xmodem, Ymodem or Zmodem (by default receive will not overwrite a
file in the repository with the same name).
show xmodem
Syntax
show xmodem
Description
Shows the Xmodem repository files.
To Next Page
Loading...
