EasyManuals Logo
Home>Lantronix>Gateway>EMG Series

Lantronix EMG Series User Manual

Lantronix EMG Series
482 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
7: Networking
EMG™ Edge Management Gateway User Guide 95
Link State: the modem interface link state
Packet Data Connection State: the cellular data connection state
Cellular Counters: the number of bytes received and transferred through the cellular interface
Revision: the modem firmware version
MEID: the modem equipment identifier
IMEi: the International Mobile Equipment Identity number of the modem
IMEi SV: the International Mobile Equipment Identity software version
FSN: the Factory Serial Number of the modem
+GCAP: the capabilities of the modem, for example, GSM communications
+CGDCONT: the packet data protocol context of the modem, for example,
1,"IP","m2m.com.attz","0.0.0.0",0,0,0,0 indicates the modem is using IP protocol with the
APN set to m2m.com.attz and is using DHCP addressing
Current Time: the number of seconds since the modem booted
Temperature: the modem temperature in Celsius
Reset Counter: the number of times the modem has been software reset
Mode: indicates if the modem is online with the cellular network
System mode: current cellular mode, such as LTE
PS state: the packet service attach status
LTE band: current band being used by the modem
LTE bw: current band frequency
LTE Rx chan: receive channel in use
LTE Tx chan: transfer channel in use
LTE CA state: carrier aggregation assignment
EMM state: EPS Mobility Management state
RRC state: Radio Resource Control state
IMS reg state: IP Multimedia Subsystem state
PCC RxM RSSI / RSRP (dBm): Main antenna Received Signal String Indicator and Reference
Signal Received Power level
PCC RxD RSSI / RSRP (dBm): Secondary antenna Received Signal String Indicator and
Reference Signal Received Power level
Tx Power: Transmit power
TAC: Tracking Area Code
RSRQ (dB) / Cell ID: Reference Signal Received Quality and cellular identifier
SINR (dB): Signal to Interference & Noise Ratio
Uptime: the same value shown in Current Time in different format
SIM lock status: the current SIM lock status on the cellular modem
Network Operator: the carrier configured on the cellular modem

Table of Contents

Other manuals for Lantronix EMG Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lantronix EMG Series and is the answer not in the manual?

Lantronix EMG Series Specifications

General IconGeneral
BrandLantronix
ModelEMG Series
CategoryGateway
LanguageEnglish

Related product manuals