Group 6 Operation – Elements and procedures Page 48
Release R1.03e LEIBINGER JET3
Display area (4): In this area the printing data of the loaded job which should be
currently printed or loaded is displayed in the WYSIWYG-mode.
Status field <Printing speed> (5): In this field the current reached printing speed as
well as the max. possible printing speed under consideration of the made settings are
displayed. The display is carried out in the measurement m/min or inch/min, de-
pending on the selected adjustments in the basic settings.
Status field <Product counter> (6): The current value of the production counter is
displayed in the field. By pressing on the field you can change or reset the value of
the counter.
If a print stop is defined after a pre-defined amount of prints, the value is also shown
in the status field. For better visualization that a pre-defined print stop has been
defined, the field is displayed with a red frame.
Figure 13
Status field <Product counter>
You will find further information also in the Chapters Reset
Production counter and Change Production counter as well as in the
Chapter Production counter!
Status field <General> (7): In this field the current time, date as well as the status
of the head cover and the ink supply are displayed.
To Next Page
Loading...
