Power Saver
The printer is saving power while it waits for the next print job. Send a job to print to take the printer out of
Power Saver mode.
Printer busy, Continue, Quit
Try one or more of the following:
• Press to read the information from the flash drive.
• Select Quit to cancel the information retrieval process.
Printing
Wait for the message to clear.
Printing from USB drive DO NOT REMOVE
Warning—Potential Damage: Do not turn the printer
o
or remove the
flash
drive while this message is
displayed.
Wait for the message to clear.
Programming disk DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer power
o
while Programming disk appears on
the display.
Programming
flash
DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer power o while Programming flash appears
on the display.
Reading USB drive DO NOT REMOVE
Wait for the message to clear.
Ready
The printer is ready to receive print jobs.
4062
Diagnostic information
166
To Next Page
Loading...
