Short paper service check
Action Yes No
Step 1
Set the media tray guides properly for the media being used.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Remove and then reinstall the switch (media size). Go to
“Switch
(media size) assembly removal ” on page 282.
Does the problem remain?
Go to step 3. Problem is solved.
Step 3
Replace the switch (media). Go to
“Switch (media size) assembly
removal ” on page 282.
Does the problem remain?
Go to step 4. Problem is solved.
Step 4
Replace the media tray assembly.
Does the problem remain?
Contact next level of
support.
Problem is solved.
Resource Save o deficient memory service check
Action Yes No
Step 1
Enable Resource Save.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Install additional memory.
Does the problem remain?
Contact next level of
support.
Problem is solved.
4062
Diagnostic information
184